How to Fix HP Printer Error 0x6100004a (100% Solved)
What is HP error 0x6100004a? In the world of error occurring on HP printer, error 0x6100004a is nothing but a connectivity issue dealing with the paper stack.
This error may occur due to the damaged or broken print head, corrupted accessories, declined Ram, hardware issues or even registry issues.
Error 0x6100004a is one of the common error happening on HP printer. If you are possessing and operating HP printer, you might have been this problem yet you didn’t know much about it since calling the technicians had already been effective to solve the problem.
Today, you don’t have to call an expert again if your HP printer experiences the same error. This time, we are going to share how to fix error 0x6100004a that commonly occurs on HP printer.
In this regards, there are 2 techniques on how to fix HP error 0x6100004a.
Technique 1: Clean The Ink Cartridge
The first technique required to fix such error above is cleaning the ink cartridge that you have installed on your HP printer. This is considered the basic and the most effective technique to help solve the problem.
To perform this technique, there are things to prepare including a pin used to clean the clogged vents, a dry cotton swab and a clean cloth. Later, follow the simple steps below:
1. Turn off your HP printer as the first step.
2. Take off all the wires that are attached to the spot where an ink cartridge is installed.
3. Remove the ink cartridges.
4. Examine the ink cartridges and look whether or not there is any clogged vents.
5. If you find several vents, clean them using the pin.
6. When you finished cleaning the vents, the next thing to do is to use the clean cloth to wipe the dust or particles. Make sure you also clean the ink that is accumulated on the print head.
7. Later, insert the ink cartridge into your HP printer and make sure you do it properly to avoid any problem.
8. Once you have done with the steps above, try to make a print job to check whether the issue has been resolved or not yet.
If these steps do not help you much in fixing the error 0x6100004a, try the second techniques in the following part.
Technique 2: Reset The Printer Completely
The second technique at which you are going to completely reset the printer is considered the universal way based on the HP engineers. It is aimed to fix error 0x6100004a though you are a non-technical person to fix the error.
Accordingly, you can perform the steps mentioned in the following part:
1. As the first step, always turn off the printer. Make sure you let it completely switch off.
2. Once the printer device is completely off, remove all the wires attached to it such as the USB cable as well as the power cord.
3. Next, wait for a few minutes before you go to the next step.
4. Plug all the wires back to your HP printer position including the USB cable and the power cord.
5. Turn on the HP printer back and let it for e few minutes to make it stable.
6. Once you are done with these steps, initiate a run test to check whether the error has been fix and the printer works properly again. This way, you can make a print job of printing document or other files.
Common Causes Why Error 0x6100004a Occurs On Your HP Printer
Technically, there are several things that might lead to error 0x610004a. However, we have summarized you the tree major causes that made the error so familiar on your HP printer.
Basically, knowing or recognizing the causes of the error will help you find and apply the right solutions to fix the problem.
Well, the major causes over the error 0x6100004a includes the blocked ink cartridges, the clogged contact points, the struck documents or paper, the firmware issues and the corruptor drivers or files.
Thus, the HP error 0x6100004a article offers you the techniques to fix the issue based on the most common causes that lead the error.