4 Procedures To Get Brother Printer Wifi Setup

So you have just bought a new Brother printer yet you don’t know how to set it up, no worry! You’ve just open the right page.

Considering that Brother is one of the remarkable brand that is also popularly used, possessing and using it for the first time must cause you feel a boot nervous to set up.

So here are the procedures of Brother Printer Wifi Setup you can follow for sure:

Procedure 1: Find the Wireless Network Settings

Before you start setting up, the first thing to do is to find the settings of your wireless network. Check and write down the current setting of the wireless network including the following:

  • Network name (known as “SSID” or “ESSID”).

To find this network name, check the base or side of your access point or wireless router and see the documentation given by your wireless router or access point.

  • Network Key (known as “Password”, “Security Key” or “Encryption Key”).
Recommended:  5 Brother Printer Error Messages That Are Commonly Occur

Procedure 2: Set Up A Brother Machine On Wireless Network

Once you have finished locating the wireless network settings of your wireless network access point, follow the steps below:

  • Connect your brother machine to the power cord and to the electrical socket.
  • Turn on the printer on.
  • Press “Menu” button located on the control panel of the machine.
  • Press the arrow key “Up” and “Down” to choose the Network and tap on “OK”.
  • Press the arrow key “Up” and “Down” to choose WLAN and tap on “OK”.
  • When “WLAN enabled” appears, tap on “Yes” to allow for the wireless network. This step will start the setup of the wireless network.
  • The machine will find the network and display a list of the Network Names (SSIDs) provided. When the list appears, please press “Up” and “Down” arrow key to choose the SSID you wrote earlier. Finally, press OK.
  • Do one of the these steps:
Recommended:  How to Fix Brother Printer No Paper Error (4 Solutions)

If you use the authentication and encryption method that need the Network Key (Password), enter the Network Key and press “OK” to apply the settings. Choose “Yes” to apply the settings.

If you use the authentication method “Open System” without encryption mode, navigate to the next step.

  • Later, the machine will try to connect the wireless network that you have chosen. If your Brother machine can successfully connect, the LCD will display a message “Connected”. However, if the connection fails, the machine will print a report about the wireless connection. Check on the error code displayed on the printed report.

Procedure 3: Download and Install Your Brother Machine’s Software

Once you deal with the Brother Printer Wifi Setup, the next thing to do is to install the driver. In this procedure, there are two ways of installing the driver.

For Windows User

Head to Downloads section of the site and download the Full Driver & Software Package. There will be installation steps given on the downloaded page.

For Macintosh User

Head to Downloads section of the site and download the Full Driver & Software Package. Similarly, follow the installation guide given in the downloaded page.

Recommended:  How To Fix Brother Printer Error Printing Due To Various Issues

If you don’t find Full Software Package, you can download Printer Driver and Scanner Driver. Follow the installation guides given the downloaded package. Of you do not find them, we suggest that you use AirPrint.

Procedure 4: Use Wireless Direct

To deal with the Brother Printer Wifi Setup, Wireless Direct allows you to connect not only your Brother printer but also your mobile device or computer directly without a Wifi access point. Follow the steps below:

  1. Confirm the wireless direct settings of your Brother printer.
  2. Press and hold the Wifi button on your Brother Printer for a second to turn on the Wifi function. The Wifi indicator will start flashing in blue once every three seconds.
  3. Use your computer or mobile device to choose the SSID of your Brother printer and enter the password. When the connection is successful, the Wifi button indicator will light in blue.